Docomo Prime SH-06A Instruction Manual page 571

Sending single data item (Write 1)
Send data from a PC to a FOMA terminal one item at a
time.
Sending one item at a time from a FOMA terminal to a
PC is not possible.
Data transfer operating methods differ depending on
the software used. Refer to the software manual for
details.
1
Send data from a PC using data
transfer software (Write 1).
: Refer to the software manual for details on
sending data.
When phonebook data is sent (from a PC to the FOMA
terminal handset) one entry at a time, entries are saved
to the smallest available memory number from [010] to
[999]. If all memory numbers from [010] to [999] are
already used, entries are saved to the smallest
available memory number between [000] and [009].
When phonebook data is received and 1,000 entries
(names, phone numbers, or mail addresses) are
already registered, or more than 1,000 entries have
been registered, a message appears notifying that
no further entries can be saved.
Sending all data (Write all/Read all)
Write and read all data at once, between a PC and the
FOMA terminal.
"Write all" and "Read all" operations require data
transfer software and your FOMA terminal
authentication password.
Data transfer operating methods differ depending on the
software used. Refer to the software manual for details.
1
Send data from a PC using data
transfer software (Forward all).
: Refer to the software manual for details on
sending data.
: Entering your authentication password on the
PC will be necessary.
: Enter your authentication password (four digits).
2
Enter the terminal security code (four
to eight digits) and the authentication
password (four digits).
3
Start data transmission.
Performing Write all from a PC to your FOMA
terminal replaces all data stored in the FOMA
terminal. All data previously stored in your FOMA
terminal will be deleted. This includes phonebook,
schedule, and protected mail data saved as secret
data. However, for an image, i-motion, Melody, PDF,
or Decome-Anime Template in the Data box, original
data is not deleted but saved additionally.
If an error occurs during data transmission from a PC
to the FOMA terminal, all data stored in the FOMA
terminal may be deleted. Check the cable
connection, the FOMA terminal battery level, and the
PC power supply before performing Write all.
Performing operations while charging the FOMA
terminal in the desktop holder is recommended.
Depending on the connected device, the
transmission status (bar display) may not appear.
22