Setting sub display
Displaying information such as other party's
name for incoming call
1
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[Set screen]/[Sub Caller ID disp].
2
Select the setting/t.
Changing design of sub display clock
<Sub Clock display>
1
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[Set screen]/[Sub Clock display].
2
Select the type/t.
: Only time appears for [Stdby clock(V ・ XL)] and [Stdby clock(H ・ XL)],
time and icon appear for [Stdby clock(V ・ L)] and [Stdby clock(H ・ L)],
and date, day of week, time and icon appear for [Stdby clock(S)].
: Set to [Stdby clock(V ・ L)], [Stdby clock(H ・ L)], or [Stdby clock(S)] to
display the battery icon.
Light/Power saver
Saving battery power
Adjust settings such as the screen display time and conserve the
battery power.
Settings for items such as display time vary for each mode as shown
below (Durations are approximations).
<Sub Caller ID disp>
Norm
(auto bright)
Display light
10 sec
time
Screen dsp
1 min
time
Brightness
*2
Automatic
Keypad light
Light
setting
*1 For details on changing original Eco mode settings nP. 105
*2 When set to [Automatic], the brightness sensor (nP. 25)
automatically adjusts the brightness of the display and the keypad
backlight according to the surrounding light. The adjustment may
take some time depending on the conditions.
1
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[Light/Power saver].
2
Select the type/t.
Setting Eco mode (Power saver) by one-touch
operation
1
In stand-by, press s (for 1+ seconds)/[Yes].
: Press s for 1+ seconds again to show the Light/Power saver
screen and change the settings.
Original Eco mode
Setting original Power saver mode
Setting light time of display and key lights
<Display light time>
Set the length of backlight time by functions when the FOMA terminal is not
in use for a set length of time.
Norm
Eco mode
Original
(fixed bright)
(Pwr saver)
Eco mode
10 sec
5 sec
10 sec
1 min
30 sec
1 min
6
1
Automatic
Light
OFF
Light
Continued on next page
*1
105
Need help?
Do you have a question about the Prime SH-06A and is the answer not in the manual?
Questions and answers