Docomo Prime SH-06A Instruction Manual page 576

AT command
AT+CMEE=<n> Sets the manner to display FOMA
terminal error reports.
[M]
AT+CNUM Displays FOMA terminal phone
number. *2
[M]
AT+COPS=[<m Selects a telecommunications
ode>[,<format>[ carrier to be connected.
,<oper>]]]
[M]
AT+CPAS Inquires the activity status of the
FOMA terminal.
[M]
Overview
Sets whether to display errors only as
*1 "ERROR", or to display reason with text or
numerical value.
<n>
0:
1:
2:
When reports are set to display by setting
"n=1" or "n=2", they are displayed in the
following format:
+CME ERROR:xxxx
xxxx is a numerical value or text. Refer to "Error
reports" (nP. 32).
number: Phone number
type
129: Does not include + international access code
145: Includes + international access code
<mode>
*2
0:
1:
2:
※ Unsupported.
3:
4:
※ Unsupported.
<format>
2:
<oper> is indicated by a hexadecimal number
consisting of a country code (MCC) and a
network code (MNC).
The formats are shown below.
Digit 1 of MCC...octet 1 bits 1 to 4.
Digit 2 of MCC...octet 1 bits 5 to 8.
Digit 3 of MCC...octet 2 bits 1 to 4.
Digit 3 of MNC...octet 2 bits 5 to 8.
Digit 2 of MNC...octet 3 bits 5 to 8.
Digit 1 of MNC...octet 3 bits 1 to 4.
The result from this command is in the
*2
following format.
+CPAS:<pas>
<pas>
0:
1:
2:
3:
4:
Parameter/Explanation
Displays "ERROR" and no result codes
(default setting)
Displays result codes with numerical
values
Displays result codes with text
: 129 or 145
Auto (Automatically searches network
and switch telecommunications carriers)
Manual (Connects to the
telecommunications carrier specified in
<oper>)
Cancels (disconnects) the connection to
the telecommunications carrier
Does not make mapping
Manual auto (Performs "Auto" processing if
not connected to the telecommunications
carrier specified in <oper>)
Fixed value
AT commands can be sent/received
AT commands cannot be sent/received
(does not send the +CPAS:1 result)
Unknown
AT commands can be sent/received and
the FOMA terminal is receiving a call
AT commands can be sent/received and
performing data communication
27
Execution
example
AT+CMEE=0o
OK
AT+CNUMo
ERROR
AT+CMEE=1o
OK
AT+CNUMo
+CME ERROR:10
AT+CNUMo
+CNUM:,"+8190
12345678",145
OK
AT+COPS
=1,2,"44F001"
o
OK
(Connects to
MCC:440MNC:10)
AT+CPASo
+CPAS:0
OK