Docomo Prime SH-06A Instruction Manual page 159

When [Domain(From)] is set to Sort rules, if a text string set in Sort rules
is included at the end of the domain of mail address, the mail is sorted to
the specified folder. In addition, a mail is sorted regardless of upper/lower
case.
1
Select a folder/C/[Sort rules].
2
Select a number to save/t.
3
Set the Sort rules.
;
Select [Address(From)]/select the entry method/t/select/
enter a mail address/t.
;
Select [Address(From/Cc)]/[Address (To/Cc)]/select the entry
method/t/select/enter a mail address/t.
;
Select [Domain(From)]/enter a domain/t.
;
Select [Group]/select a group/t.
;
Select [Subject]/enter a text string/t.
;
Select [Phonebook empty].
;
Select [All rcvd (sent) messages]/[Yes].
• Set to the top of the Sort rule.
4
Repeat steps 2 and 3 to set multiple rules.
5
Press i.
If the 2in1 mode is set to [Dual mode] when the 2in1 is used, an
address to which the sort rule is applied can be set after step 2. The
following items can be set.
Address A Sort rule is applied to mail of Address A.
Address B Sort rule is applied to mail of Address B.
Not set Sort rule is applied to mail of Address A/Address B.
• The set sort rule is enabled regardless of the mode.
• When the 2in1 is used, the sort rule set in Address A cannot be
displayed in [B mode]. The sort rule set in Address B cannot be
displayed in [A mode].
• To change the address to which the sort rule is applied, select the
registered sort rule and select [2in1 address].
• The sort rule set in [A mode]/[B mode] is registered in [Not set].
Submenu operations for sort rules screen
■
[Delete one]/[Yes]/i
[Delete all]/[Yes]/i
Adding a signature to i-mode mail
Save signature or set whether to add signature automatically when
composing i-mode mail.
Only one signature can be saved.
Enter up to 10,000 single-byte (5,000 double-byte) characters. Insert up
to 90 KB of images. [K] (line breaks) are available.
1
In stand-by, press m/[Mail setting]/[Save
signature].
2
Enter a signature/t.
: To delete the signature: In the signature display, press c (for 1+
seconds)/t/[OFF].
3
Select [ON].
: When setting to [OFF], the signature is manually added (nP. 135).
When the 2in1 is used, the signature of either Address A or Address B
is saved depending on the 2in1 mode when the signature was saved. In
the [Dual mode], the address selection screen appears after step 1.
Select an address to save.
If a signature is added when the 2in1 is used, a signature to be added is
automatically switched according to a sender's address. If Save
signature is set to [OFF] in the [Dual mode], the selection screen
appears when adding signature and a signature can be selected.
<Save signature>
157