Connecting To Bluetooth Devices - Docomo Prime SH-06A Instruction Manual

Searching is not available in the following cases.
While 1Seg or MUSIC Player is activated with connection made
using Audio service
While receiving a call or during a voice/Videophone call with
connection made using Headset service or Hands-free service
Submenu operations for search list screen
■
[Register Devices]
[Connection info]
Enter up to 32 single-byte (16 double-byte) characters for a device
name.
■ Searching only unregistered devices to register
1
In the Custom menu, select
[Register new device].
2
Register.
: For details on registering nstep 3 of "Registering Bluetooth device"
on P. 398

Connecting to Bluetooth devices

Connect to registered Bluetooth devices.
1
In the Custom menu, select
[List/cnnct/discnnct].
: To update the information: Press a.
1
2
Device list
1 Device category icon (nP. 398)
2 Classification icon
Already registered and unconnected device that is set to default
$
connection device
nP. 398
[LifeKit]/[Bluetooth]/
[LifeKit]/[Bluetooth]/
3
&
Already registered device that is being connected
Already registered and connected device that is set to default
%
connection device
3 Device name
2
Select a Bluetooth device to connect to/t.
: Select a service and connect: Select a Bluetooth device to connect
to/m/select a service/t/C.
: [H] flashes at approximately 0.5-second intervals when the
connection is completed.
: To disconnect the Bluetooth device: Select a Bluetooth device to
disconnect/t/[Yes].
If a Bluetooth device is turned off during the connection or
disconnection processing or there is no response from the Bluetooth
device, it takes up to approximately 20 seconds for the processing.
If the FOMA terminal is disconnected from a Bluetooth device while
being connected, the connected service is switched to connection
stand-by. Also, if the FOMA terminal is turned off while being connected
or in connection stand-by, the connection or connected service will be
switched to connection stand-by when the power is turned on next time.
When connection to the registered Bluetooth device is failed, delete the
registration once and register the device again. It may be able to
connect.
Entering the Bluetooth passkey may be required depending on the
other party's Bluetooth device when connecting, updating information,
or sending via Bluetooth communication.
Submenu operations for device list screen
■
[Delete]/[Yes]
[Def cnnctn dev]/[Yes]
Set a device that is automatically connected when a Bluetooth
compatible function is activated.
[Connection info]
To edit the device name: Press C/edit the device name/t.
399