Setting Channels - Docomo Prime SH-06A Instruction Manual

Channel setting

Setting channels

To watch 1Seg, first set the channels, and then select a channel
list.
A channel list can be saved using either Auto channel setting or Preset
channel setting.
Up to nine channel lists can be saved. Each channel list can save up to
62 stations.
Automatically saving a broadcast station into
channel list
<Auto channel set>
Select a prefecture/district from information with the preset broadcast
stations of each area. The terminal begins to search for broadcast stations
and then saves them into the channel list.
Perform Auto channel setting inside the area of a terrestrial digital TV
broadcasting service.
1
In the Custom menu, select [1Seg]/[Channel setting].
2
Select a number to save/C/[Auto channel
[Yes].
: Alternatively, press m to perform Auto channel setting.
3
Select an area/t.
4
Select a prefecture/district/t.
: Searching broadcast stations starts. It takes approximately 40
seconds to end the search.
238
5
Press t/[Yes]/select whether to use the channel
list/t.
Saving preset channel list
Select a prefecture/district of your current location to save the preset
broadcast stations into the channel list.
1
In the Custom menu, select [1Seg]/[Channel setting].
2
Select a number to save/C/[Preset CH setting].
: Alternatively, press i to perform Preset channel setting.
3
Select an area/t.
4
Select a prefecture/district/t.
5
Press t/[Yes]/select whether to use the channel
list/t.
If the Preset channel setting cannot be performed, make the Auto
channel setting.
set]/
Selecting a channel list to be used
1
In the Custom menu, select [1Seg]/[Channel setting].
2
Select a channel list/t.
: [b] appears in the set channel list.
<Preset CH setting>