Docomo Prime SH-06A Instruction Manual page 128

3
Select a list number/t.
4
Select a name/t.
: To save other phone numbers: Repeat steps 3 and 4.
: When the other party has two or more phone numbers, saving is
required for each number.
■ Registering from phonebook
1
In stand-by, press a/select a name/C/[Edit
data]/[Accept/reject set].
2
Select a registration list/t/enter the terminal
security code/t.
3
Select the list number/t.
Deleting phone number in list
■
1
In the save list screen, select a
[Yes].
If all phone numbers saved in the list are deleted after Accept/Reject
calls is set to enable, the setting is disabled.
■ Changing phone number in list
1
In the save list screen, select a name/t/[Change].
2
Select the name/t.
■ Checking registered other party's phone number
1
In the save list screen, select a name/C.
Enabling Accept/Reject calls
1
In the Custom menu, select
[Accept/Reject calls]/enter the terminal security
code/t.
2
Select an item/t/[ON].
126
<Accept calls/Reject calls>
<Delete>
name/t/[Delete]/
<Change>
[Settings]/[Security]/
Reject calls by reason of non-disclosure
Rejecting a call with no caller ID
Set the handset to reject calls when caller ID is not sent,
depending on reason.
The following are the types of non-disclosure reason. For details nP. 72
User unset Payphone
Calls received from a caller who is set to be rejected due to a
non-disclosure reason will not be connected. Calls of other
non-disclosure reasons will be connected. Rejected callers hear a busy
signal. The stock icon [B] (missed call) appears, and the reason of
non-disclosure is recorded in Received calls.
It is recommended to also set the Caller ID Request Service.
Reject calls by reason of non-disclosure cannot be set for numbers set to
Accept calls.
Also when Reject unknown is set, Reject calls by reason of
non-disclosure is prioritized for calls with no caller ID.
Reject calls by reason of non-disclosure is prioritized when set with the
Public mode (Drive mode).
SMS and i-mode mail are received normally regardless of the setting of
this function.
1
In the Custom menu, select
[Accept/Reject calls]/enter the terminal security
code/t.
2
Select a reason/t.
3
Select the setting/t.
Set mute ring time
Muting ring tone for a caller unset in
phonebook
Set a ring tone to sound after a set number of seconds when
receiving a call from the caller not in the phonebook.
This is one way to avoid a nuisance call such as one-ring phone scam.
Unavailable
[Settings]/[Security]/