Docomo Prime SH-06A Instruction Manual page 221

When the Auto save mode (nP. 217) is set to [ON], all still pictures
are saved automatically.
Changing the image size, setting Effect shot or switching cameras
cancels the Continuous mode.
If an incoming call is received or the alarm is activated in the Continuous
mode, the still pictures being shot are retained and the Continuous mode
is canceled. However, depending on the timing when an incoming call is
received or the alarm is activated, the still pictures being shot are
discarded, and the still picture shooting screen reappears.
Closing the FOMA terminal or pressing H while shooting in the
Continuous mode causes shooting to be interrupted and the camera
mode to be ended. In addition, changing the position causes shooting
to be interrupted, and returning to the still picture shooting screen.
If the FOMA terminal is moved when shooting with Strobophoto set,
[Failed to shoot still picture] may appear and the shooting may not be
available.
Submenu operations for continuous shooting preview
■
screen
[Save all]
[Delete all]
[Save one]
[Delete one]
[Paste loc. Info]/t/[Yes]
For details on position location nP. 309
Shooting panoramic pictures
By importing images continuously while moving the FOMA terminal
horizontally, a panoramic picture can be created automatically.
Panoramic pictures are saved in the size of 2560 (W) × 640 (H).
The image quality is set to [HIGH QUALITY], the AF mode is set to
[Center AF], these settings cannot be changed.
Shooting panoramic pictures is not available when shooting with the sub
camera or when in the viewer position. If the sub camera is set or the FOMA
terminal is switched to the viewer position while displaying the panoramic
picture shooting screen, the normal still picture shooting screen appears.
<Panorama>
1
In the still picture shooting screen,
press m.
: Press m again to return to the normal still
picture shooting screen.
2
Press t/&.
: After the shooting start sound, panoramic
shooting starts. Move the FOMA terminal to
either direction of left or right within the range
for shooting a panoramic picture (do not move
back once moved to one direction). Steady the
position of the cross mark which appears in
the center at the start of shooting.
: For the moving speed of the FOMA terminal,
make sure that [q] appears as the moving
speed indicator on the lower left of the screen.
: When shooting is almost completed, [t] appears. Even after [t]
appears, the combined image is updated by moving the FOMA
terminal. However, when [u] appears, further updating is not
available. Proceed to step 3.
1
2
Panoramic picture
shooting screen
3
Press t to end shooting.
: After the shooting end sound, the imported images are combined,
and the preview screen appears.
4
Press t.
: Save an image.
Panoramic picture
shooting screen
1 Cross mark display
Appears in the center of the display
considering the position where the
shooting is started as an origin. Use
this display to check the gap from the
origin when moving the camera.
2 Moving speed display
Indicates the moving speed of the
FOMA terminal.
r
Too slow
q
Appropriate speed
s
Too fast
Continued on next page
219