Docomo Prime SH-06A Instruction Manual page 380

Ending selected function
■
1
While multiple functions are in use, press $.
2
Press C/select a function/t.
: To end all functions: Press m/[Yes].
Auto power ON
Turning power ON automatically
Turn the FOMA terminal on automatically at a specified time.
Set the correct date and time in advance (nP. 56).
Auto power ON settings are repeated daily until disabled.
Disable Auto power ON before turning the FOMA terminal off when near
high-precision electronic devices or devices that use weak electronic
signals, on an aircraft, in hospitals or in other locations where the use of
mobile phones is prohibited.
For details on setting the LED nP. 111
For details on setting the vibrator nP. 99
1
In the Custom menu, select [Settings]/[General
settings]/[Auto power ON/OFF]/[Auto power ON].
2
Select the [Auto power ON] field/t/[ON].
: To disable the setting: Select [OFF]/i.
3
Select the [Time] field/t/enter a time (24-hour
format)/t.
4
Select the [Alarm settings] field/t/[ON].
: To disable the alarm: Select [OFF]/i.
5
Select the [Alarm tone] field/t/select an alarm
tone/i.
: To check the alarm tone: Select an alarm tone/t.
6
Select the [Alarm volume] field/t/adjust the
volume with u/t.
7
Press i/[Agree].
378
When specified time arrives
■
The power is turned on automatically, and a confirmation message appears.
Alarm sounds for approximately 15 seconds if Alarm setting is set to
[ON]. Press the following keys to stop alarm.
When the FOMA terminal is opened: Press a key (excluding &).
When the FOMA terminal is closed: Press &.
This message also appears when the power is already on at the
specified time.
While engaged in a call or receiving a call, alarm sounds after the call is
disconnected.
If Auto power ON and Alarm (Alarm/Schedule/Reception/Recording)
are set for the same time, Auto power ON takes priority. The alarm is
activated after the Auto power ON notification.
Auto power ON may not be activated when the battery pack is removed
and the power is turned off.
Turning power ON automatically at alarm time
and sounding alarm
<Link alarm/power ON>
1
In the Custom menu, select [Settings]/[General
settings]/[Auto power ON/OFF]/[Link alarm/power
ON].
2
Select [ON]/[Agree].
: To disable the setting: Select [OFF].
Auto power OFF
Turning power OFF automatically
Turn the FOMA terminal off automatically at a specified time.
Set the correct date and time in advance (nP. 56).
Auto power OFF settings are repeated daily until disabled.
1
In the Custom menu, select [Settings]/[General
settings]/[Auto power ON/OFF]/[Auto power OFF].