Using Camera; Using Location Information - Docomo Prime SH-06A Instruction Manual

Using camera

When the camera is started from i-appli, shot images are saved and
used as a part of i-appli.
1
While software is running, select a camera startup
item/t.
: The camera mode is activated. Adjust the brightness and use Auto
timer and Zoom.
: Use some software to set [Image size], [Continuous mode], [Image
quality], [Frame], etc.
2
Press t.
: To save: Press t.
Some software may automatically send images and entered data used
with i-appli over the Internet. Images used with i-appli include images
shot using the camera function operated with i-appli, images selected
from My picture of Data box operated with i-appli and images acquired
using the Ir communication function operated with i-appli.
Using Bar code reader
1
While software is running, select a Bar code reader
startup item/t.
: The camera mode (Bar code reader) is activated.
2
Position the camera to show the bar code (JAN/QR
code/CODE128)/t.
: An image of the bar code (JAN/QR code/CODE128) is shot.
To scan CODE128, downloading the compatible i-appli software is
required.
The scanned data is used/saved with the i-appli.
292
Saving ToruCa
1
While software is running, select a ToruCa saving
item/t.
2
Preview/Save item.
;
Select [Preview].
;
Select [Save new]/select a folder/t.
;
Select [Overwrite]/select data/t/i.
Setting alarms
[Enter time] and [Set repeat] are entered with i-appli.
1
While software is running, select an alarm setting
item/t/t.
2
Select a number to register/t.
3
Set the alarm.
: For details on setting alarms nP. 379

Using location information

1
While software is running, select a location history
item/t/[Yes].
2
Select location information from the location history
list/t.
For i-appli that can refer to the phonebook, saved location information
is available.
Using Ir communication/iC communication
Not available while in the Self mode.
1
While software is running, start Ir communication/iC
communication/[Yes].
: To cancel communication: Press C.