Docomo Prime SH-06A Instruction Manual page 554

1
Insert the accompanying CD-ROM
into your PC.
: The initial screen appears.
2
Click [データリンクソフト・各種設定
ソフト] (Data link software/Setting
software) b [インストール] (Install)
in the [FOMA通信設定ファイル (USB
ドライバ)] (FOMA communication
configuration file (USB driver))
field, and then double-click
[FOMAinst.exe].
3
Read the licensing agreement and
click [同意する] (Agree) to agree.
: This is the user licensing agreement for the
FOMA driver installation tool. Click [同意しない]
(Disagree) to cancel the installation.
4
Connect the FOMA terminal to your
PC via FOMA USB Cable with
Charge Function 02 when [FOMAと
パソコンを接続してください。]
(Connect FOMA to PC.) appears.
: The installation in progress screen appears and
installation automatically begins.
: Connect the FOMA terminal while the power is on.
5
When [FOMA通信設定ファイル (ドラ
イバ) のインストールが完了しまし
た。] (Installation of the FOMA
communication configuration file
(Driver) is completed.) appears.
: Installation of the FOMA communication
configuration file finishes.
6
Click [インストールする] (Install) to
continue installing DOCOMO
Connection Manager.
: Refer to "Installing DOCOMO Connection
Manager" on P. 9 for subsequent operations.
Installation may take a few minutes.
When a message prompting to restart the PC
appears, follow the instruction and restart.
If a PC and the FOMA terminal are connected before
the FOMA communication configuration file is
installed, another driver may be automatically installed.
When this happens, performing the operation in step 2
displays a message saying that the installed driver
must be uninstalled. In this case, uninstall the driver
following instruction shown on the screen and install
the FOMA communication configuration file.
Confirming installed FOMA
communication configuration file
(Driver)
If the FOMA terminal is not properly recognized by
the PC, setup and communications are not possible.
Example: Confirming Windows Vista drivers
The screens are different for Windows XP and
Windows 2000.
1
Click [スタート] (Start) menu b [コ
ントロールパネル] (Control panel),
and then click the [システムとメンテ
ナンス] (System and maintenance)
b [システム] (System) icon.
: System properties screen appears.
For Windows XP
: Click [スタート] (Start) menu b [コントロールパ
ネル] (Control panel), and then click the [パ
フォーマンスとメンテナンス] (Performance and
maintenance) icon b [システム] (System) icon.
For Windows 2000
: Select [スタート] (Start) menu b [設定] (Settings)
b [コントロールパネル] (Control panel), and then
double-click the [システム] (System) icon.
5