Restricting Others From Using; Various Lock Functions - Docomo Prime SH-06A Instruction Manual

3
Enter the current PIN code/t.
: If the PIN1/PIN2 code is entered incorrectly, [PIN1/PIN2 code not
recognized] appears after step 4, and return to step 3.
4
Enter the new PIN code/t/enter the new PIN code
again/t.
Disabling PIN lock
Use the same steps to disable the PIN2 code lock.
1
In the PUK entry screen with PIN lock set, enter PUK
(eight digits)/t.
2
Enter the new PIN1 code/t/enter the new PIN1
code again/t.

Various lock functions

Restrict phonebook operations such as retrieving, saving and
deleting, and calling with the dial keys.
Lock function
All lock All operations other than power ON/
OFF and answering voice/
Videophone calls are not available.
Omakase Lock The access to all the data in the
FOMA terminal is remotely locked.
Self mode All functions that require a signal such
as phone, i-mode mail, SMS and
i-mode are not available.
Function lock Display, edit and operation for
Multimedia, Mail, Phonebook, and
Schedule are not available. Each
function can be set individually.
Operation/Restrictions Page
P. 119
P. 120
P. 121
P. 121
Lock function
Keypad dial lock Dialing and phonebook editing are not
available.
Lock Multi lock Keypad dial lock, IC card lock and
selection Function lock can be set collectively.
Also, if Multi lock auto-set is set, Multi
lock can be automatically set when
the display turns off.
IC card lock Prevents the use of IC card functions. P. 298
Side key lock Locks the side key and prevents
errors.
All lock

Restricting others from using

Restrict the unauthorized use of the FOMA terminal for all
operations other than power ON/OFF and answering voice/
Videophone calls.
Enabling All lock
1
In the Custom menu, select
[Lock settings]/enter the terminal security
t/[All lock]/[Yes].
: When All lock is set, [All lock] and [U] appear in the stand-by display.
Disabling All lock
: In stand-by, enter the terminal security code/t.
During All lock, [待受画面1] appears in the stand-by display. In such
cases, the calendar and Machi-chara do not appear. When All lock is
disabled, the setting returns to original one.
Even if All lock is enabled, IC card functions are not locked.
Even if a missed call is received when All lock is enabled, the call is not
displayed on the screen. When All lock is disabled, the stock icon [B]
(missed call) appears.
Operation/Restrictions Page
P. 123
P. 124
P. 124
[Settings]/[Security]/
code/
Continued on next page
119