Docomo Prime SH-06A Instruction Manual page 245

[1Seg settings]
/[Main/Sub language]/select the setting/t
/[Change language]/select the setting/t
/[Set when closed]/select an operation/t
Set the operation when the FOMA terminal is closed.
/[Effect setting]/select the setting/t
Set an effect to display when selecting a station with UP/
DOWN in the horizontal view with the viewer position.
/[Switch auto area]/select the setting/t
Change to a channel list automatically if the broadcasting area
is changed.
/[Status request]
[Add channel]
When a 1Seg program in the different area from the one set to the
channel list is being watched, the broadcast station of the program may
not be added to the channel list.
[Channel srch (d)], [Channel srch (e)]
Stations are searched and switched in order of received frequencies.
[Display mode (W)]
Set to [Video (fs/fr)] to display smooth movies switching the numbers of
frames automatically to double.
[Mark display (W)]
Set whether to show icons (indicating Clock, Signal status, etc.) that
appear on the upper part of the screen. If [Temporary display] is set, the
icons appear for approximately 7 seconds when the channel and
volume are changed.
[App area (L)]
Set whether to display the name of broadcast station or 1Seg program,
and the channel number. If [Temporary display] is set, the names or
numbers appear for approximately 7 seconds when the channel is
changed.
[Caption Settings]
Captions are not available depending on programs. If Caption is set to
[ON] in the following cases, the caption area appears regardless of
Caption Settings.
When display mode (L) is set to [Video+data] in the normal position/
vertical view with the viewer position
When display mode (W) is set to [Video (default)] in the horizontal
view with the viewer position
If [Linked manner] is set, captions appear when 1Seg is activated in the
Manner mode.
[Dolby Mobile Set.]
To listen with Virtual 5.1ch surround sound, set to [V5.1ch(Headset)]
and use the stereo earphone.
[Display audio OFF]
If [Disp OFF(aud only)] is set, the video is turned off, and only audio is
output. If [Display/audio OFF] is set, both video and audio are turned
off. [Display/audio OFF] can be set only while 1Seg is being recorded.
Press a key, change the position, or open/close the FOMA terminal to
disable the setting. If [Display/audio OFF] is set, 1Seg is muted when
disabling the setting.
[Reload]
Reloading is possible in data broadcasting mode.
[Show certificate]
Certificate can be displayed in data broadcasting mode.
[Return to data BC]
Operate when data broadcasting site is displayed in data broadcasting
mode.
[Comp intro message]
Send to the FOMA terminal supporting Media To function so that the
recipient can select the information and activate 1Seg.
[Set when closed]
While making a video recording, setting [End] will also set mute, and
the recording continues.
When 1Seg is activated if Set when closed is set to [Continue] or
[Silent], the information of data broadcasting/data broadcasting site
may be automatically updated since 1Seg is kept activated even with
the FOMA terminal closed. In such cases, packet transmission charges
may apply.
Continued on next page
243