SMS that cannot be sent for an unspecified reason is saved as unsent SMS.
Depending on the signal status, text for recipient may not appear correctly.
When the 2in1 mode is set to [B mode], SMS cannot be composed and sent.
SMS can be sent even when 186 or 184 is added. However, SMS can
be sent with caller ID notified even when 184 is added.
Submenu operations for compose SMS screen
■
[Send]
[Save]
[Report request]
[SMS expiry]
Editing and sending saved SMS
Saved SMS can be edited and sent in the same method as mail (nP. 142).
SMS rcv
When SMS is received
For details on icons displayed when receiving SMS nP. 142
1
Receive SMS automatically ([U] flashes).
2
After reception, the receive complete screen appears
and the SMS ring tone sounds ([[] appears).
: If no operations are performed in the receive complete screen for
approximately 30 seconds, the screen before reception automatically
reappears.
: The stock icon [C] (mail message) appears when the stand-by
display reappears.
: When the FOMA terminal is closed, the sub display shows the total
number of i-mode mail, SMS, and Area Mail.
3
Select [Mail]/select the SMS/t.
When received mails saved in the FOMA terminal exceed the maximum
number/capacity of saved mails, they are deleted starting with the oldest.
Checking new SMS
Received SMS is held at the SMS center while the handset is outside the
service area, in Self mode, or turned off. Retrieve from the SMS center.
1
In stand-by, press m/[Check new SMS].
Automatic retrieval may not start immediately after checking.
When the maximum number of SMS in the FOMA terminal handset or
the FOMA card that can be stored is exceeded or when there is no
available memory in the FOMA terminal handset or the FOMA card,
nP. 165
Check new SMS is not available.
nP. 166
SMS setting
Setting SMS
Setting SMS center
The setting does not normally need to be changed.
1
In stand-by, press m/[Mail setting]/[SMS
setting]/[SMS center]/[User set].
2
Enter an SMS center address/t.
: Enter up to 20 digits.
3
Select the setting/t.
Receiving notification of SMS retrieval
<Report request>
Set whether to receive a delivery report for SMS.
1
In stand-by, press m/[Mail setting]/[SMS
setting]/[Report request].
2
Select the setting/t.
<Check new SMS>
<SMS center>
165
Need help?
Do you have a question about the Prime SH-06A and is the answer not in the manual?