Docomo Prime SH-06A Instruction Manual page 384

Calendar screen layout
■
1 Today (Highlighted)
2 Selected day (Shown in a black box)
3 Set vacation/Set holiday (Shown red)
4 Saved schedule (Icon display by category)
[q] appears for timer for starting 1Seg programs and [r] appears for
timer for recording 1Seg programs.
5 Schedule saved (Underlined)
■ Submenu operations for calendar screen
[New]
[Delete]
/[Delete all past]/enter the terminal security
[Yes]
Delete all entries prior to specified day.
/[Delete all]/enter the terminal security code/t/[Yes]
[Show]
/[Show all scheds]
/[Category/filter]/select a category icon/t
/[Show by contact]/select a contact/t
/[Go to date]/enter a date/t
[Set]
/[Set vacation]
/[Set holiday]
382
1
2
3
4
5
■
1
nP. 382
Saving schedules
code/t/
1
2
nP. 386
3
nP. 384
nP. 384
[Send data]
/[Send Ir data]
/[iC transmission]
/[Send via Bluetooth]
[Copy allbmicroSD]
[View microSD data]
[Connect to Center]
Displaying calendar by entering date from stand-by
In stand-by, enter a date/t/[Schedule].
Entered dates and shown calendar correlate as follows.
01 to 31: Current month (1st to 31st)
0101 to 1231: Specified date (January 1 to December 31)
20000101 to 20991231: Specified date and year (January 1, 2000 to
December 31, 2099)
<New>
Always set date/time and subject.
In the Custom menu, select [LifeKit]/[Classic
schedule]/C/[New].
Select the [Date] field/t.
: To set All day: Press a/select the setting/t.
Select the [Start] field/enter the start date/enter a
time (24-hour format)/select the [End] field/enter
the end date/enter a time (24-hour format)/t.
: When All day is set to [ON], the start time and the end time cannot be
set. It is set as a plan at 00:00 on the start date to 23:59 on the end
date.
: To select a date from the calendar: In the Date settings screen, press
C/select a date with w/t.
: To reset Date settings: Press i.
nP. 362
nP. 365
nP. 403
nP. 348
nP. 353
nP. 129