Docomo Prime SH-06A Instruction Manual page 101

Vibrator
Notifying you of incoming calls and
alarms with vibration
Set the vibrator to notify you of incoming calls, mail, alarms, GPS
function and touching the touch panel.
The vibrator when an alarm is activated follows the vibrator setting.
Vibrates for approx. 0.8 sec b stops for approx. 0.8 sec and
Pattern1
repeats
Vibrates for approx. 0.3 sec b stops for approx. 0.3 sec b
Pattern2
vibrates for approx. 0.3 sec b stops for approx. 1 sec and
repeats
Pattern3 Continuous vibration
Melody For melodies created with vibration settings, the vibrator is
ON activated in conjunction with the melodies. Melodies that do not
have vibration settings vibrate in Pattern1.
1
In the Custom menu, select [Settings]/[Snd/Vibrator/
Manner]/[Vibrator].
2
Select an item/t.
3
Select the vibrator/t.
: For Touch vibrator, set to [ON]/[OFF] only.
: Select from [Pattern1] to [Pattern3] with u to sample the vibration
pattern.
Note that if the vibrator is set and the FOMA terminal is left on a table, it
may fall due to vibration.
Melody Call setting
Changing ringing tone
When a voice call is received, the other party hears the melody
with sense of the season instead of the normal ringing tone. Also
set your favorite melody.
If a call is made from Videophone, Melody Call is not played.
Melody Call is a paid service that requires subscription (i-mode
subscription is also required).
Refer to "Mobile Phone User's Guide [Network Services]" for details on
using Melody Call.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Incoming settings]/[Melody Call
setting]/[Yes].
: Connect to the i-mode site of Melody Call. Packet transmission
charges are incurred for connecting to the i-mode sites (Packet
transmission charges are not incurred for connecting to setting sites).
2
Set.
Quality alarm
Sounding alarm when a line is likely to
be disconnected
Quality alarm is available only for voice calls.
1
In the Custom menu, select [Settings]/[Phone
settings]/[In-call settings]/[Quality alarm].
2
Select an alarm tone/t.
The call may be disconnected without the alarm sounding if the signal
suddenly becomes weak.
Ring time setting
Setting duration of mail ring tone and
tones when using GPS function
1
In the Custom menu, select [Settings]/[Snd/Vibrator/
Manner]/[Ring time setting].
2
Select the item.
;
Select [Mail ring time set]/[ON].
;
Select [GPS ring time set]/select an item/t/[ON].
Continued on next page
99