Changing Videophone Settings; Setting For Switching A Voice/Videophone Call; Setting Answer Method Of A Videophone Call During I-Mode; V.phone While Packet>74 - Docomo SH-05A Instruction Manual

Making your camera image a normal image
■
1
While sending a camera image, press C/[Change
send img]/[Self-portrait]/[Reverse on/off].
Normal image is displayed as it is seen, and Mirror image is seen with
its left and right reversed.
The other party sees the normal image regardless of the setting.

Changing Videophone settings

Redialing as a voice call automatically
<Redial voice call>
When a Videophone call is not connected, the call is automatically switched
to the voice call and made again.
If a Videophone communication is started, Redial voice call is not
performed.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[Redial voice
[ON].
If a call is redialed as a voice call, the voice call charges are incurred.
Note that Redial voice call may not work if a call is placed to an ISDN
synchronous 64K access point or an ISDN Videophone that does not
support the 3G-324M standard (nP. 52) (as of May 2009), or if an
invalid phone number is dialed by mistake. In addition, charges may be
incurred.
Notify switch mode
Setting for switching a voice/
Videophone call
This setting lets the other party know whether the FOMA terminal
can be switched between a voice call and a Videophone.
74
When the Notify switch mode is set to "Deactivate", the other party
<Reverse on/off>
cannot switch the call.
The Notify switch mode cannot be changed during voice calls,
Videophone calls or outside the service area.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[Notify switch mode].
2
Select the setting/t/[Yes].
: To check settings: Select [Check Indication].
V.phone while packet
Setting answer method of a
Videophone call during i-mode
Set the following answering methods.
V.phone priority
Packet priority
Voice mail
Call Forwarding
call]/
Videophone calls, during Software updates, Pattern definitions updates
or data transmissions using a packet transmission, are rejected.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[V.phone while
packet]/select an answering method/t.
: [V.phone priority] setting does not automatically end the packet
transmission unless the Videophone is answered (The packet
transmission is disconnected when the call is answered).
: To set to [Voice mail] or [Call Forwarding], applying for the respective
service is required. If [Voice mail] or [Call Forwarding] is set without a
subscription, the Videophone call is set to [Packet priority].
Answers incoming Videophone calls.
Rejects incoming Videophone calls.
Automatically connects to Voice Mail Service.
Automatically connects to Call Forwarding Service.