Using Chaku-Moji - Docomo Prime SH-06A Instruction Manual

Submenu operations for Received calls details screen
■
Refer to submenu operations for Redials list screen (nP. 65) for the
following functions.
Add to phonebook
Search location
Refer to submenu operations for Redials details screen (nP. 65) for the
following functions.
Delete one
Sel Multi number
Chaku-moji
[Ringing time]
[Display all]/[Limit display]
For details on Display all and Limit display nP. 65
[Ringing time]
Ringing time cannot be checked for items whose mark type of received
calls is [g].
A ringing time of [0:00] appears when a call is rejected due to Accept
calls, Reject calls, Reject unknown, Reject calls by reason of
non-disclosure and Public mode (Drive mode) settings.
Chaku-moji

Using Chaku-moji

Send a message (Chaku-moji) at the same time when making a
voice call or Videophone call to display it on the other party's
ringing phone and to previously tell the points.
Send up to 10 single/double-byte characters, pictograms or symbols.
Charges are applied to the sender side. Not applied to the receiver side.
Refer to the DOCOMO website or "Mobile Phone User's Guide [Network
Services]" for details and compatible models of Chaku-moji.
While All lock is set or Function lock is applied to Chaku-moji, Chaku-moji
is not displayed even if it is received. When the lock is disabled, the
message contents can be checked in the received calls details screen.
Chaku-moji appears only while receiving (making) a call. When the call is
answered, Chaku-moji disappears.
66
Compose message Create schedule
Caller ID setting Add prefix setting
Select 2in1 V.phone image
Example: When Chaku-moji is received for a voice call
Chaku-moji
Editing and setting message
■ Saving a message
<Create message>
Save up to ten messages.
1
In the Custom menu, select [Settings]/[Other NW
Services]/[Chaku-moji]/[Create message].
2
Select a number/i.
: To check a saved message: Select a number/t.
3
Enter a message/t.
Enabling/Disabling a message display
■
1
In the Custom menu, select [Settings]/[Other NW
Services]/[Chaku-moji]/[Message display].
2
Select the display method/t.
<Message display>