Docomo Prime SH-06A Instruction Manual page 393

Set recorded Voice memos (stand-by) to On hold tone, Hold tone
(nP. 74), or Reply message (nP. 77).
Key/Touch sound is silenced while recording a voice memo.
Recording is stopped if a call is received (Voice is recorded until
stopped).
Talk time/cost
Displaying call duration/charge
Check previous or total call duration/charge for voice calls,
Videophone calls, etc.
Voice call duration, Videophone call duration and 64K data
communication duration appear for call duration. Duration time includes
calls made and received.
Call charge includes only calls made. When calls are made to toll-free
numbers, directory assistance (104), etc., [0YEN] or [||||||YEN]
appears.
Call charges for switching between Videophone and voice call appear as
[Last call cost AAYEN] and [V.phone call cost AAYEN]. Charges for
calls switched multiple times appear for each voice/Videophone call in
total.
Call charge is saved on the FOMA card. If a different FOMA card is
inserted, the total call charges stored (those calculated since December
2004) on the currently inserted card appear.
Call duration/charge that appears can be reset.
Call duration/charge that appears is an estimate and may differ from
actual amount. Call charge does not include consumption tax.
Displaying call details
1
In the Custom menu, select [Settings]/[NW
Services]/[Talk time/cost].
While reading the FOMA card, a message stating the status appears.
Transmission duration and charge for i-mode and packet transmission
are not counted. Refer to the "Mobile Phone User's Guide [i-mode]
FOMA version" for details on checking the i-mode charge, etc.
If the previous call duration exceeds 9:59:59, the counter restarts from
0:00.
If the total call duration exceeds 999:59:59, the counter restarts from
0:00.
Time used for receiving or making a call is not counted.
Last call cost is reset to [||||||YEN] when the power is turned off.
Transmission charges for Chaku-moji are not counted.
International call charges for WORLD CALL are counted. International
call charges for other call services are not counted.
If subscribed to the 2in1, total call charge is the total of Number A and
Number B.
Resetting call duration/call cost
The recorded previous call duration or the total call duration/cost can be
reset to 0.
1
In the Custom menu, select [Settings]/[NW
Services]/[Talk time/cost]/i.
2
Select the item to reset.
;
Select [Reset total]/enter PIN2 code/t.
;
Select [Talk time reset]/enter the terminal security code/t.
3
Select [Yes].
When the total call duration is reset, the year and date of resetting is
saved. When the total call charge is reset, the charges at the time of
resetting, as well as the year and date of the reset, are saved.
391