Docomo Prime SH-06A Instruction Manual page 123

Docomo prime series w-cdma and gsm/gprs phone
Table of Contents

Advertisement

If Omakase Lock is used with the Public mode (Drive mode) set, a
message of the Public mode (Drive mode) is played and the call is
disconnected.
When the subscriber of the Dual Network Service is using the mova
service, the handset cannot be locked.
Even if the subscriber is not a user of the FOMA terminal, the lock
service is applied by a request of the subscriber.
Omakase Lock can be disabled only if a FOMA card, whose phone
number is same one when lock was enabled, is inserted into the FOMA
terminal. If the Omakase Lock cannot be disabled, contact "General
Inquiries" on the back of this manual.
Self mode
Restricting making/receiving calls
Restrict all functions that require a signal.
The following functions are disabled.
Voice call
Videophone
Message R/F
i-mode
iC communication
Infrared remote control
Software update
1
In the Custom menu, select [Settings]/[Phone
settings]/[Self mode].
2
Select the setting/t/[Yes].
: When the Self mode is set, []] disappears and [g] appears.
The Self mode is not available when in i-mode stand-by ([7] flashes).
While in the Self mode
Emergency numbers (110, 119, and 118) can be dialed while in the Self
mode. However, the Self mode is disabled after the call.
If a call is received, the stock icon [B] (missed call) or [E] (voice mail)
for the call does not appear even after the Self mode is disabled.
i-mode mail
SMS
i-concier
Ir communication
Bluetooth function
Network services
Message stating the handset is turned off or in a place with no signal is
played to the other party. DOCOMO Voice Mail Service and Call
Forwarding Service are available.
Received i-mode mail and Message R/F are held at i-mode center and
SMS is held at SMS center. To receive, disable the Self mode and
perform Check new messages or Check new SMS.
Position location, Location notification, Location provision, Map, and
Location history in the Map/GPS function cannot be used. In addition,
saving, editing, or deleting location service clients or Service settings of
Location request menu cannot be performed.
Function lock
Restricting display of phonebook,
schedule, etc.
Restrict an access to mail and phonebook by a function to
prevent an access to personal information or unauthorized
editing.
The following items can be locked separately.
i-mode/i-Channel
i-concier
i-appli/i-Widget
Camera/Multimedia
Manga&BookReader
Mail
1
In the Custom menu, select
[Lock settings]/enter the terminal security
t/[Function lock].
2
Select an item to lock/disable/t/C.
: E appears for locked items and H appears for disabled items.
: When Function lock is set, [V] appears.
Ir communication, iC communication and Bluetooth communication for
items to which Function lock is applied cannot be received.
Phonebook
Rec msg/Voice memo
Memo/Schedule/Alarm
ToruCa
GPS
Chaku-moji
[Settings]/[Security]/
code/
Continued on next page
121

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prime SH-06A and is the answer not in the manual?

Questions and answers

Table of Contents