Docomo Prime SH-06A Instruction Manual page 567

6
Select [インターネットにダイヤル
アップ接続する] (Dial-up to the
Internet) and click [次へ] (Next).
: A wizard startup screen appears.
7
Select [インターネット接続を手動で
設定するか、またはローカルエリア
ネットワーク (LAN) を使って接続し
ます] (Connect to Internet manually
or through local area network
(LAN)) and click [次へ] (Next).
: The screen to select the Internet appears.
8
Select [電話回線とモデムを使ってイ
ンターネットに接続します] (Connect
through phone line and modem)
and click [次へ] (Next).
: The screen to specify the modem appears.
9
Confirm that [FOMA SH06A] is set
in [インターネットへの接続に使うモ
デムを選択する] (Select modem to
use to connect to the Internet) and
click [次へ] (Next).
: The Internet account connection information
screen appears.
: Set to [FOMA SH06A] if not set.
: For Bluetooth connection, set the [(in-use
Bluetooth-linked standard modem)] or
[(Bluetooth modem provided by a Bluetooth
maker)].
: The screen appears only when multiple
modems are installed.
10
Enter the host number in the [電話
番号] (Phone number) field and
click [詳細設定] (Advanced).
: Advanced connection properties screen appears.
: Confirm that [市外局番とダイヤル情報を使う]
(Use area code and dial-up information) shows
H. When E appears instead, change to H.
11
Confirm that all settings in the [接続]
(Connection) tab are set as shown
in the example screen below.
12
Click the [アドレス] (Addresses) tab
and confirm that all settings are set
as shown in the example screen
below.
: For TCP/IP settings used for connecting to an
Internet service provider, confirm with the
Internet service provider or network
administrator.
13
Click [OK].
: The Internet account connection information
screen reappears.
14
Click [次へ] (Next).
: The Internet account login information screen
appears.
18