Switching A Voice/Videophone Call During A Call; Pressing A Dial Key To Answer A Call; Closing The Foma Terminal To End/Hold Calls - Docomo Prime SH-06A Instruction Manual

Docomo prime series w-cdma and gsm/gprs phone
Table of Contents

Advertisement

Switching a voice/Videophone call
during a call
The caller (other party) selects to switch between a voice call and
a Videophone.
The call recipient cannot switch (Available with models that support
switching between a voice call and a Videophone).
The Notify switch mode (nP. 83) must be set to "Activate" for the
recipient's FOMA terminal.
1
The caller switches between a Videophone and a
voice call during a call.
Switching from a voice call to a Videophone
: Switching takes approximately 5 seconds. Switching may take more
time depending on the signal status. [Please wait for a while] appears
and a guidance message is played.
Switching from voice call to Videophone
: A guidance message is played and the screen above appears.
Select [Yes] to send a camera image to the other party. Select [No] to
send an image of [テレビ電話代替] with [Camera Off] superimposed.
Switching from Videophone to voice call
: A guidance message is played before switching. Start conversation
in voice call.
Switching is not available when another screen is displayed from the
Multi Assistant, while a call is on hold, during a packet transmission call,
or when the FOMA terminal is closed. When any function is activated
from the Submenu, switching may not be available.
Any key answer

Pressing a dial key to answer a call

Set Any key answer so that calls can be answered with the keys
other than the ones normally used.
Normal
s
1 to 9, 0, *, t, v, i, m, a, c, y
Voice call
Videophone s, i
1
In the Custom menu, select [Settings]/[Phone
settings]/[Incoming settings]/[Any key
[ON].
Set when closed
Closing the FOMA terminal to end/hold
calls
1
In the Custom menu, select [Settings]/[Phone
settings]/[Set when closed].
2
Select the setting/t.
When set to [Hold sound], the set hold tone plays. Hold tone can be
changed. For Videophone calls, the image set in Hold image is sent to
the other party.
When set to [Silent], the set hold tone does not play. For Videophone
calls, the Chara-den or still picture set in a substitute image is sent to
the other party.
When set to [Hold sound] or [Silent], open the FOMA terminal to
resume the call.
If a device such as an earphone/microphone (sold separately) is
connected, the call can continue while the handset is closed regardless
of Set when closed.
Any key answer
answer]/
Continued on next page
73

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prime SH-06A and is the answer not in the manual?

Questions and answers

Table of Contents