Setting A First Number To Phone Numbers - Docomo Prime SH-06A Instruction Manual

Setting numbers other than WORLD CALL
<IDD prefix setting>
Save up to ten international call access codes used when international
calls are made from Japan.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[Int'l dial assist]/[IDD
prefix setting].
2
Select a number to save as a new entry/t.
: To change a saved number: Select a number/t/[Change].
: To delete a saved number: Select a number/t/[Delete]/[Yes].
: To set/disable Auto prefix: Select a number/t/[Prefix/cancel].
• When setting Auto prefix, [w] appears to the right of the name.
3
Enter a name/t.
: Enter up to 14 single-byte (7 double-byte) characters.
4
Enter a prefix/t.
: Press 0 for 1+ seconds to enter +.
: Enter up to 16 digits.
Setting country codes
Save up to 30 country codes to make international calls from overseas.
For details on making a call to the phone in country saved in Set country
code nP. 438
1
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[Int'l dial assist]/[Set
country code].
2
Select a number to save as a new entry/t.
: To change a saved country code: Select a number/t/[Edit].
: To delete a saved country code: Select a
[Yes].
3
Enter a country name/t.
: Enter up to 14 single-byte (7 double-byte) characters.
70
<Set country code>
number/t/[Delete]/
4
Enter a country code/t.
: Enter up to six digits including +.
: Do not delete +.
Int'l prefix
Setting a first number to phone
numbers
Save up to five prefixes, including international call access codes, to
place at the beginning of phone numbers. The numbers are also
available when calls are made from a phonebook, Redial or Received
calls.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[Int'l prefix].
2
Select a number to save as a new entry/t.
: To change a saved number: Select a number/t/[Change].
: To delete a saved number: Select a number/t/[Delete]/[Yes].
3
Enter a prefix/t.
: Press 0 for 1+ seconds to enter +.
: Enter up to 16 digits.
Calling with prefixes
<Select prefix>
1
In stand-by, enter a phone number/C.
2
Select [Add prefix setting]/[Select prefix].
3
Select a prefix/t/s.
The caller ID may not be notified or displayed correctly depending on
the telecommunications carrier, even if Notify caller ID setting
(nP. 57) is set to "Send ID". In this case, making a call from Received
calls is not available.