Docomo Prime SH-06A Instruction Manual page 577

AT command
AT+CPIN=<pin Enters the UIM password (PIN1,
>[,<newpin>] PIN2). *2
[M]
AT+CR=<mode> Sets whether to display packet
transmission/64K data
communication before
"CONNECT" result code is
displayed during line connection.
"GPRS" is displayed for packet
transmission, and "SYNC" is
displayed for 64K data
communication.
[M]
AT+CRC=<n> Sets to use extended results code
at reception.
[M]
AT+CREG=<n> Sets service area information on
or off. *1
[M]
AT+CUSD=[<n Changes setting toward net for
>[,<str>[,<dcs>] optional services, etc.
]]
[M]
AT+FCLASS=< Sets the mode.
n>
[M]
AT+GCAP Displays the ability list of the
FOMA terminal.
[M]
AT+GMI Displays FOMA terminal maker
name in single-byte alphanumeric
characters.
[M]
Overview
<pin>
Enters PIN1 while waiting for PIN1 input
(Enter <pin> parameter only)
Enters PIN2 while waiting for PIN2 input
(Enter <pin> parameter only)
Enters PUK1 while waiting for PUK1 input
Enters PUK2 while waiting for PUK2 input
※ Encloses this string parameter with
<newpin>
Enters a new PIN1 while waiting for PUK1
input
Enters a new PIN2 while waiting for PUK2
input
※ Encloses this string parameter with
<mode>
0:
1:
*1
n=0: Does not use extended results code
*1
n=1: Uses extended result codes
When AT+CREG=1 is set, information is set
in the format "+CREG:<stat>". 0, 1, 4 or 5 can
be set for the <stat> parameter.
<n>
0:
1:
<stat>
0:
1:
4:
5:
<n>
*1 0:
1:
<str>
Service code
※ Refer to "Mobile Phone User's Guide
<dcs>
0:
*1
<n>
0:
*2
―
―
*2
Parameter/Explanation
quotation marks (" ") when entering.
quotation marks (" ") when entering.
Does not display when line is connected
(default setting)
Displays when line is connected
(default setting)
Does not send (default setting)
Sends
Outside area
Inside area (home)
Unknown
Inside area (visitor)
Answers without intermediate result
(default setting)
Answers with intermediate result
[Network Services]".
Fixed value
Data (fixed value)
28
Execution
example
AT+CPIN?o
+CPIN:SIM PIN1
OK
(Indicates waiting
status for PIN1
input)
AT+CPIN="1234"
o
OK
AT+CPIN?o
+CPIN:SIM PUK1
OK
(Indicates waiting
status for PUK1
input)
AT+CPIN="12345
678","1234"o
OK
AT+CR=1o
OK
ATD*99***1#
+CR:GPRS
CONNECT
AT+CRC=0o
OK
AT+CREG=1o
OK
(Set to send)
AT+CREG?o
+CREG:1,0
OK
(Indicates outside
area)
+CREG:1
(Moved from
outside area to
inside area)
AT+CUSD=0,"xxx
xxx"o
OK
AT+FCLASS=0o
OK
AT+GCAPo
+GCAP:+CGSM,
+FCLASS,+W
OK
AT+GMIo
SHARP
OK