License Plate Light - Subaru 2009 IMPREZA Service Manual

License Plate Light

LIGHTING SYSTEM
22.License Plate Light
A: REMOVAL
1. 4 DOOR MODEL
1) Disconnect the ground cable from battery.
2) Remove the license plate light mounting screw
(A) and then remove the lens.
(A)
LI-00034
3) Remove the bulb.
2. 5 DOOR MODEL
1) Disconnect the ground cable from battery.
2) Remove the license plate light while pushing it to
the left and pulling it.
LI-00821
3) Remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
LI-28