Subaru 2009 IMPREZA Service Manual page 3029

Rear Accessory Power Supply Socket
ENTERTAINMENT
13.Rear Accessory Power
Supply Socket
A: WIRING DIAGRAM
<Ref. to WI-125, WIRING DIAGRAM, Rear Acces-
sory Power Supply Socket System.>
B: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the console box. <Ref. to EI-48, RE-
MOVAL, Console Box.>
3) Disconnect the harness connector, and remove
the claws (two) in accessory power supply socket.
4) Pull the accessory power supply socket out to
remove.
ET-00377
C: INSTALLATION
Install in the reverse order of removal.
ET-15