Subaru 2009 IMPREZA Service Manual page 3073

Hide thumbs Also See for 2009 IMPREZA:

• Be careful not to damage the meters and instrument panel.

• Be careful not to damage the meter glass.

• Make sure the electrical connector is connected securely.

• After installation, make sure that each meter operates normally.

• Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.

• Do not apply an excessive force on the printed circuit.

• Do not drop or otherwise apply impact.

• When the combination meter of model with immobilizer has been replaced, be sure to perform the regis-

tration of immobilizer.

C: PREPARATION TOOL

1. SPECIAL TOOL

ILLUSTRATION

2. GENERAL TOOL

Circuit tester

General Description

SUBARU SELECT

MONITOR III KIT

INSTRUMENTATION/DRIVER INFO

Used for troubleshooting the electrical system.

Used for measuring resistance and voltage.