Subaru 2009 IMPREZA Service Manual page 2971

Hide thumbs Also See for 2009 IMPREZA:

9. Combination Switch (Light)

1) Disconnect the ground cable from battery.

2) Remove the screws and remove the steering

column cover lower.

3) Remove the three mounting screws of steering

column cover upper.

4) Disconnect the connector from combination

5) Remove the three screws, and pull out the com-

bination base switch assembly.

Combination Switch (Light)

6) Remove the screws which secure the switch,

then remove the combination switch.

B: INSTALLATION

Install in the reverse order of removal.

LIGHTING SYSTEM