Front Washer Nozzle - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

8. Front Washer Nozzle

1) Remove the washer hose from the washer noz-

2) Open the clips on the underside of the front hood

with a thin screwdriver or other tool, and remove

the washer nozzle.

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

1. VISUAL CHECK

Check the following items, if a failure is found re-

place the parts.

• Make sure the nozzle and hose are not clogged.

• Make sure the hose is not bent.

2. SPRAY POSITION CHECK

1) Turn the wiper switch to OFF position.

2) While the vehicle is at a standstill, make sure

that the washer injection position is as shown in the

3) After check, if the spray position is largely differ-

ent from the position, replace with a new washer

Spray position:

A: 250 mm (9.84 in)

B: 315 mm (12.4 in)

Front Washer Nozzle

WIPER AND WASHER SYSTEMS