Subaru 2009 IMPREZA Service Manual page 2959

Hide thumbs Also See for 2009 IMPREZA:

SEAT BELT SYSTEM

3. SHOULDER SEAT BELT CENTER

ASSEMBLY (4 DOOR MODEL)

1) Remove the rear seat. <Ref. to SE-11, REMOV-

AL, Rear Seat.>

2) Remove the rear quarter trim. <Ref. to EI-58,

REMOVAL, Rear Quarter Trim.>

3) Remove the rear shelf trim. <Ref. to EI-60, RE-

MOVAL, Rear Shelf Trim.>

4) Remove the bolts, then remove the shoulder

seat belt assembly.

5) Remove the seat belt lower anchor bolt.

4. CENTER SEAT BELT ASSEMBLY

1) Remove the rear seat cushion.

2) Remove the bolts, then remove the center seat

belt assembly.

Rear Seat Belt

B: INSTALLATION

• During installation, make sure that the seat

belts are not twisted.

• After installation, make sure that the seat

belts are smoothly extended and wound.

• Make sure that the center seat belt is securely

1) Install in the reverse order of removal.

Tightening torque:

Refer to "COMPONENT" of "General Descrip-

tion". <Ref. to SB-3, REAR SEAT BELT, COM-

PONENT, General Description.>

2) Turn the seat belt as shown in the figure.