Subaru 2009 IMPREZA Service Manual page 2979

Clearance/Parking Light Bulb
LIGHTING SYSTEM
14.Clearance/Parking Light Bulb
A: REMOVAL
1) When removing the clearance/parking light bulb,
fully turn the steering wheels to opposite direction
from the turn signal light bulb to remove.
2) Disconnect the ground cable from battery.
3) Turn the mud guard inward.
4) Turn socket (A) from the wheel arch, and re-
move the clearance/parking light bulb.
(A)
LI-00832
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
LI-19