Subaru 2009 IMPREZA Service Manual page 3057

9) Apply the primer to the adhesive surface of glass
side and body side using sponge.
Primer for glass:
Dow Automotive's
ESSEX U-401, U-402
Painted surface primer:
Dow Automotive's
ESSEX U-413
NOTE:
• Primer once attached to the painted surface of
the body and internal trim is hard to wipe off. Mask
the circumference of such area.
• Let primer dry for about ten minutes before in-
stalling the glass.
• Do not touch the surface coated with primer.
(1)
(5)
(4)
(2)
(1) Application of primer
(2) Glass side
(3) Body side
(4) Molding
(5) Dam rubber
Windshield Glass
(1)
(3)
GW-00793
GW-23
GLASS/WINDOWS/MIRRORS
10) Apply adhesive to the glass end surface as
shown.
Adhesive:
Dow Automotive's
ESSEX U-400HV or equivalent
(1)
(2)
(3)
(5)
(1) Molding
(2) Locating pin
(3) Dam rubber
(4) Adhesive
(5) Seal (driver's side only)
(3)
(3) (4)
GW-00678