Spot Map Light - Subaru 2009 IMPREZA Service Manual

LIGHTING SYSTEM

24.Spot Map Light

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and spot map light mount-
ing screws (B).
• Model without sunroof
(A)
• Model with sunroof
(A)
(B)
3) Disconnect the harness connectors and remove
the spot map light.
B: INSTALLATION
Install in the reverse order of removal.
Spot Map Light
LI-00224
(B)
LI-00225
LI-00313
LI-00314
C: INSPECTION
1. SPOT MAP LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
2. SPOT MAP LIGHT SWITCH
Measure the spot map light resistance.
Switch position
OFF
ON
Replace the spot map light if faulty.
LI-30
2 1
LI-00606
Terminal No. Standard
1 and 2 1 M or more
1 and 2 18 5.4