Rear Gate Glass - Subaru 2009 IMPREZA Service Manual

14.Rear Gate Glass

A: REMOVAL
1) Remove the rear spoiler. <Ref. to EI-39, RE-
MOVAL, Roof Spoiler.>
2) Remove the rear wiper motor. <Ref. to WW-19,
REMOVAL, Rear Wiper Motor.>
3) Disconnect the electrical connectors from rear
defogger terminal.
4) Remove the glass in the same procedure as for
windshield glass. <Ref. to GW-20, REMOVAL,
Windshield Glass.>
B: INSTALLATION
1) Apply the primer to the glass and body sides in
the same procedure as for windshield glass. <Ref.
to GW-21, INSTALLATION, Windshield Glass.>
2) Fabricate the cartridge nozzle tip as shown and
set the sealant gun with the adhesive.
(1)
(1) 10 mm (0.39 in)
(2) 8 mm (0.31 in)
Rear Gate Glass
(2)
60
(2)
GW-00494
GW-25
GLASS/WINDOWS/MIRRORS
3) Apply adhesive in the same procedure as for
windshield glass. <Ref. to GW-21, INSTALLA-
TION, Windshield Glass.>
(1)
(5)
C
C
(2)
(6)
(3)
(1) Glass
(2) Adhesive
(3) Molding
(4) Spacer
(5) Heat wire terminal
(6) Seal
(2)
(4)
A
A
B
B
(4)
GW-00713