Rear Quarter Glass - Subaru 2009 IMPREZA Service Manual

17.Rear Quarter Glass

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear quarter trim. <Ref. to EI-58,
REMOVAL, Rear Quarter Trim.>
3) Remove the glass in the same procedure as for
windshield glass. <Ref. to GW-20, REMOVAL,
Windshield Glass.>
B: INSTALLATION
1. 5 DOOR MODEL
1) Mount the fastener on the vehicle body.
2) Apply the primer to the glass and body sides in
the same procedure as for windshield glass. <Ref.
to GW-21, INSTALLATION, Windshield Glass.>
3) Fabricate the cartridge nozzle tip as shown and
set the sealant gun with the adhesive.
(1)
(1) 10 mm (0.39 in)
(2) 8 mm (0.31 in)
Rear Quarter Glass
(2)
60
(2)
GW-00494
GW-31
GLASS/WINDOWS/MIRRORS
4) Apply adhesive with the dam rubber installed in
the same procedure as for windshield glass. <Ref.
to GW-21, INSTALLATION, Windshield Glass.>
(6)
(2)
(4)
(1)
(4)
(3)
(6)
(1) Glass
(2) Adhesive
(3) Dam rubber
(4) Molding
(5) Fastener
(6) Clip
(7) 66 mm (2.60 in)
(8) 17 mm (0.61 in)
(1)
(7)
(8)
(3)
(2)
(5)
(3)
GW-00816