Rear Brake Pad - Subaru 2002 IMPREZA Service Manual

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

5. Rear Brake Pad

1. 14 INCH TYPE

1) Set the vehicle on a lift.

2) Loosen the wheel nuts.

3) Jack-up the vehicle, and then remove the rear

4) Remove the lower caliper bolt.

5) Raise the caliper body upward and support it.

Do not disconnect the brake hose from caliper

6) Remove the pad.

If the brake pad is difficult to remove, use the same

procedure as for front disc brake pad.

<Ref. to BR-22, REMOVAL, Front Brake Pad.>

REAR BRAKE PAD

2. 15 INCH TYPE

1) Set the vehicle on a lift.

2) Loosen the wheel nuts.

3) Jack-up the vehicle, and then remove the front

4) Remove the M clip.

5) Remove the two pad pins.

6) Remove the cross spring.

7) Expand the pads and push piston back.

8) Remove the pad and shim.

(1) Cross spring

(1) Brake pad

Table of Contents

2001 impreza