Rear Washer - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

WIPER AND WASHER SYSTEMS

11.Rear Washer

1) Remove the high-mounted stop light. <Ref. to LI-

29, REMOVAL, High-mounted Stop Light.>

2) Remove the washer hose from the washer noz-

3) Push the claw of the nozzle from the reverse

side of roof spoiler with a flat tip screwdriver or

equivalent, and remove the washer nozzle.

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

1. VISUAL CHECK

Check the following items, if a failure is found re-

place the parts.

• Make sure the nozzle and hose are not clogged.

• Make sure the hose is not bent.

2. SPRAY POSITION CHECK

1) Turn the wiper switch to OFF position.

2) While the vehicle is at a standstill, make sure

that the washer injection position is as shown in the

3) After check, if the spray position is largely differ-

ent from the position, replace with a new washer

Spray position:

A: 140 mm (5.5 in)