Making the Power Connections
Please note that the instructions in this section apply only to an electric-reject model of
APEX Rx. To attach the main power cord to the APEX, do the following.
Connecting the Main Power Cord
To attach the main power cord to the APEX, do the following.
1) Unscrew the 8 mounting bolts on the face of the APEX's control panel, and remove
the face plate.
2) Feed the main power cord through the hole in the frame and through the black
plastic grommet in the base of the control panel, as shown below.
Thermo Scientific—APEX 500 Rx User's Guide
Page 17