Setting Passwords - Thermo Scientific APEX 500 Rx User Manual

Setting Passwords

If you wish to restrict access to your APEX detector, you (as a supervisor) must assign
passwords to operators, engineers, and yourself. The following table shows the access
privileges of operators, engineers, and supervisors as well as their default passwords.
Use the default passwords, when entering this menu for the first time to set up security
levels for yourself and your coworkers. Unlike a personal computer, no names are
used—only passwords. Thus, all supervisors, engineers, and operators are recognized
only by their passwords.
0 Read/Lock
1 Operator 1
2 Operator 2
3 Engineer
4 Supervisor
5 Factory
More Information
For more information about setting passwords, please see pages 249–253 in the main
APEX User's Guide.
Page 20
Available to this
Access Level
(None) View everything
Clear peak
Language
OPR1 AutoLearn
Learn detect level
Change products
OPR2 Manual AuditCheck
Manual QAT
Manual print
Learn and adjust—
Phase angle
Detect level
Learn IXR
Edit pack length
Learn reject
confirmations
Reset reject counts
ENGI Everything except
password changes
SUPE Everything
– Model/machine
SF factory menu
Thermo Scientific—APEX 500 Rx User's Guide
Not Available
to this Access Level
(N/A)
Adjust—
Phase angle
Detect level
Pack gap
Detect no-pack
distance
Machine settings
Reject settings
I/O settings
Phase and IXR
tracking
AuditCheck settings
QAT settings
Passwords
NVRAM reset
Set APEX model
or machine type
SF factory menu
Password required for
every change