How To Get Help; Web Access; Email Access; Telephone Access - Foundry Networks Switch and Router Installation And Configuration Manual

Foundry Switch and Router Installation and Configuration Guide
Enhancement
Enhanced software version
information
New strict mode for ACL
processing of UDP traffic
New MIB tables for Adaptive
Rate Limiting

How to Get Help

Foundry Networks technical support will ensure that the fast and easy access that you have come to expect from
your Foundry Networks products will be maintained.

Web Access

• http://www.foundrynetworks.com

Email Access

Technical requests can also be sent to the following email address:
• support@foundrynet.com

Telephone Access

• 1-877-TURBOCALL (887-2622)
• 408.586.1881

Warranty Coverage

Contact Foundry Networks using any of the methods listed above for information about the standard and
extended warranties.
1 - 4
Description
The show version and show flash commands provide more
information about the software on the device.
You can configure a Foundry device to send all UDP packets to
the CPU for ACL comparison, instead of just the first UDP
packet with specific source and destination information.
The Foundry MIB contains two new tables for port and VLAN
Adaptive Rate Limiting information.
• snPortCARTable – Contains port-related management
objects
• snVLanCARTable – Contains VLAN-related management
objects
The Foundry MIB is contained in the MIBxxxxx.mib file, where
xxxxx is the flash code version of the corresponding software
release. For example, MIB file MIB07105.mib corresponds
with software release 07.1.05.
United States
Outside the United States
See Page
does not
affect this
document
13-23
does not
affect this
document
December 2000