Edge-Core ES4626 User Manual page 525

Command Mode: All modes
Usage Guide: According to the output messages of this command, we can view the
OSPF link state database messages
Example:
Switch#show ip ospf database
Router Link States (Area 0.0.0.2)
Link ID ADV Router
192.168.1.2 192.168.1.2
192.168.1.3 192.168.1.3
Net Link States (Area 0.0.0.2)
Link ID ADV Router
20.1.1.2 192.168.1.2
Summary Link States (Area 0.0.0.2)
Link ID ADV Router
6.1.0.0 192.168.1.2
6.1.1.0 192.168.1.2
22.1.1.0 192.168.1.2
ASBR-Summary Link States (Area 0.0.0.2)
Link ID ADV Router
192.168.1.1 192.168.1.2
AS External Link States
Link ID ADV Router
2.2.2.0 192.168.1.1
2.2.3.0 192.168.1.1
17.6.5.1.11 show ip ospf interface
Command: show ip ospf interface <interface>
Function: Display the OSPF interface messages
Parameter: <interface> is the name of interface
Default: Not displayed
Command Mode: All modes
Example:
Switch#show ip ospf interface
Loopback is up, line protocol is up
OSPF not enabled on this interface
Vlan1 is up, line protocol is up
Internet Address 10.10.10.50/24, Area 0.0.0.0
Router ID 10.10.11.50, Network Type BROADCAST, Cost: 10
Age Seq# CkSum Link count
254 0x80000031 0xec21 1
236 0x80000033 0x0521 2
Age Seq# CkSum
254 0x8000002b 0xece4
Age Seq# CkSum Route
68 0x8000002b 0x5757 6.1.0.0/22
879 0x8000002a 0xf8bc 6.1.1.0/24
308 0x8000000c 0xc8f0 22.1.1.0/24
Age Seq# CkSum
1702 0x8000002a 0x89c7
Age Seq# CkSum Route
1499 0x80000056 0x3a63 E2 2.2.2.0/24 [0x0]
1103 0x8000002b 0x0ec3 E2 2.2.3.0/24 [0x0]
525