Edge-Core ES4626 User Manual page 565

neighbor <ip-address> route-reflector-client
no neighbor
route-reflector-client
（2） If there are more than one route reflectors in the cluster, the following
commands can configure cluster-id
Command
BGP configuration mode
bgp cluster-id <cluster-id>
no bgp cluster-id
（3） If the route reflector from clients to clients is needed, the following
commands can be used.
Command
BGP configuration mode
bgp client-to-client reflection
no bgp client-to-client reflection
6．Configure Peer Groups
（1） Create peer groups
Command
BGP configuration mode
neighbor <TAG> peer-group
no neighbor <TAG> peer-group
（2） Add neighbors to peers groups
Command
BGP configuration mode
Configure the current switch as route
reflector and specify a client. the no
<ip-address> neighbor
route-reflector-client
format deletes a client.
Explanation
Configure cluster id; format "no" of
the no bgp cluster-id command
cancels
configuration.
Explanation
Configure the allowance of the
route reflector from clients to
clients; the no bgp client-to-client
reflection commands forbids this
allowance.
Explanation
Create
neighbor
command deletes peer groups.
Explanation
565
<ip-address>
commands
the cluster
peer groups; the
<TAG> peer-group
id
no