Edge-Core ES4626 User Manual page 262

4. Apply QoS to ports
Command
Interface Mode
mls qos
[pass-through-dscp]|dscp
[pass-through-cos]|ip-precedence
[pass-through cos]|port priority <cos>]
no mls qos trust
mls qos cos {<default-cos> }
no mls qos cos
service-policy {input <policy-map-name> |
output <policy-map-name>}
no service-policy
<policy-map-name>
<policy-map-name>}
mls qos
<dscp-mutation-name>
no mls
<dscp-mutation-name>
5. Configure queue out method and weight
Command
Interface Mode
queue bandwidth
weight3 weight4 weight5 weight6 weight7
weight8>
no queue bandwidth
queue mode strict
queue mode wrr
Global Mode
wrr-queue cos-map <queue-id> <cos1 ...
cos8>
trust
{input
| output
dscp-mutation
qos dscp-mutation
<weight1 weight2
set.
Explanation
Configure port trust; the "no mls qos
[cos
trust" command disables the current
trust status of the port.
Configure the default CoS value of the
port; the "no mls qos cos" command
restores the default setting.
Apply a policy map to the specified
port; the "no service-policy {input
<policy-map-name>
<policy-map-name>}"
deletes the specified policy map
applied to the port. Egress policy map
is not supported yet.
Apply DSCP mutation mapping to the
port; the "no mls qos dscp-mutation
<dscp-mutation-name>"
restores the DSCP mutation mapping
default.
Explanation
Set the WRR weight for specified
egress queue;
bandwidth" command restores the
default setting.
Configure queue out method to pq
method; the "queue mode wrr"
command restores the default WRR
queue out method.
Set CoS value mapping to specified
egress queue; the "no wrr-queue
262
| output
command
command
the "no
queue