Commands For Gvrp - Edge-Core ES4626 User Manual

Command
Interface Mode
bridge-ext garp timer join <timer-value>
no bridge-ext garp timer join
bridge-ext garp timer leave <timer-value>
no bridge-ext garp timer leave
bridge-ext garp timer hold <timer-value>
no bridge-ext garp timer hold
Global Mode
bridge-ext garp timer leave all <timer-value>
no bridge-ext garp timer leave all
2. Enable GVRP function
Command
Interface Mode
bridge-ext gvrp
no bridge-ext gvrp
Global Mode
bridge-ext gvrp
no bridge-ext gvrp

5.2.3 Commands for GVRP

5.2.3.1 bridge-ext gvrp
Command: bridge-ext gvrp
no bridge-ext gvrp
Function: Enable the GVRP function for the switch or the current Trunk port; the "no
gvrp" command disables the GVRP function globally or for the port.
Command mode: Interface Mode and Global Mode.
Default: GVRP is disabled by default.
Usage Guide: Port GVRP can only be enabled after global GVRP is enabled. When
global GVRP is disabled, the GVRP configurations in the ports are also disabled. Note:
GVRP can only be enabled on Trunk ports.
Example: Enable the GVRP function globally and for Trunk port 1/10.
Switch(Config)# bridge-ext gvrp
Switch(Config)#interface ethernet 1/10
Switch(Config-Ethernet1/10)# bridge-ext gvrp
Explanation
Configure the hold, join
and leave timers for GARP.
Configure the leave all
timer for GARP.
Explanation
Enable the GVRP function
on current port.
Enable the GVRP function
for the switch.
180