Edge-Core ES4626 User Manual page 622

Function: For displaying the community messages permitted by BGP
Parameter: None
Default: None
Command Mode: All modes
Usage Guide: Messages in the same community multiply closable at the same time
Example:
Switch#show ip bgp community-info
Address Refcnt Community
[0x3312558] (3) 100:50
17.8.5.1.5 show ip bgp community-list
Command:show
[exact-match]
Function: For displaying the routes containing the community list messages and
permitted by BGP
Parameter: <ADDRESS-FAMILY>: Address-family such as "ipv4 unicast"
<NAME>: Community list
Default: None
Command Mode: All mode
Usage Guide: Configure the community list with ip community-list command and the
contained community as well. When displayed with its name, communities included in all
the lists are contained
Example:
Switch(config)#ip community-list commu per 100:50
Switch#sh ip bgp community-list commu
BGP table version is 25, local router ID is 10.1.1.64
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
* 100.1.1.0/24
*> 172.0.0.0/8
17.8.5.1.6 show ip bgp dampening
Command: show ip bgp [<ADDRESS-FAMILY>] dampening
{<dampened-paths>|<flap-statistics>|<parameters>}
Function: Display the routes permitted by BGP and relevant to the route dampening.
Parameter: <ADDRESS-FAMILY>: Address-family, such as "ipv4 unicast"
Default: None
ip bgp [<ADDRESS-FAMILY>]
Next Hop
0.0.0.0
0.0.0.0
community-list
Metric LocPrf Weight Path
32768 700 800 i
32768 700 800 i
622
<NAME>