Edge-Core ES4626 User Manual page 553

Backup Designated Router (ID) 192.168.2.3
Interface Address fe80::203:fff:fe01:d28
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:10
Neighbor Count is 1, Adjacent neighbor count is 1
Vlan2 is up, line protocol is up
Interface ID 2004
IPv6 Prefixes
fe80::203:fff:fe01:257c/64 (Link-Local Address)
2000:1:1::1/64
OSPFv3 Process (*null*), Area 0.0.0.0, Instance ID 0
Router ID 192.168.2.2, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 192.168.2.1
Interface Address fe80::203:fff:fe01:429e
Backup Designated Router (ID) 192.168.2.2
Interface Address fe80::203:fff:fe01:257c
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:10
Neighbor Count is 1, Adjacent neighbor count is 1
Displayed information
Vlan1 is up, line protocol is up
IPv6 Prefixes
fe80::203:fff:fe01:257c/64 (Link-Local
Address)
2001:1:1::1/64
OSPFv3 Process (*null*)
Area 0.0.0.1
Instance ID 0
Router ID 192.168.2.2, Network Type
BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority
1
Designated Router (ID) 192.168.2.2
Interface Address fe80::203:fff:fe01:257c
Backup Designated
Explanations
Let the interface up both logically and
physically
IPv6 address of the interface and the
length of the prefix
Ospfv3 process the interface belongs
Area the interface belongs
Instance ID is 0
Process ID; Router ID; Network Type; Cost
LAS transmission delay on the interface;
state; electing the priority of the layer 3
switch.
Specifying layer 3 switch
Router (ID) Back up designated layer 3 switch
553