Bandwidth Control - Edge-Core ES4626 User Manual

enabled flow control.
Loopback: Sets up Ethernet port to enable loopback testing function.
Example: Assign port to be Ethernet 1/1 and set up MDI as normal; Admin control status
as no shutdown, speed/duplex as auto, port flow control status as disabled flow control
and Loopback as no loopback. Then click Apply button and these set up items will be
applied to port 1/1.
Port list table displays the related information of the switch physical ports.

3.6.3 Bandwidth control

Click port configuration, Ethernet port configuration, Bandwidth control and proceed to do
port bandwidth control. 1
Port: Specifies configuration port
Bandwidth control level: port bandwidth control. The unit is Mbps and the value
range is 1~10000Mbps
Control type: Ingress means to control port bandwidth when receiving data
packet sent from outside the switch. Egress means to control port bandwidth
when sending data packets to outside of the switch. Ingress and Egress means
to control port bandwidth when both receiving and sending.
Example: Choose Port to be Ethernet 1/1, set up Bandwidth control level as 100Mb,
Control type as Ingress, then click Apply button. So the port 1/1 will execute bandwidth
152