Edge-Core ES4626 User Manual page 470

default-metric <value>
no default-metric
[no]redistribute
|connected| static| ospf| isis| bgp}
[metric<value>]
[route-map<word>]
[no]default-information originate
2）Configure the route offset
Command
Router configuration mode
[no]
<access-list-number
|access-list-name>
<number > [<ifname>]
c）configure and apply route filter and route aggregation
Command
Router configuration mode
[no] distribute-list {<
access-list-number
|access-list-name > |
prefix<prefix-list-name>} {in|out}
[<ifname>]
Configure the default metric of distributed
route; the default-metric <value>
no default-metric command restores the
default configuration 1
Redistribute the routes distributed in other
route protocols into the RIPng data packet;
{kernel
the [no]redistribute {kernel |connected|
static| ospf| isis| bgp} [metric<value>]
[route-map<word>]
command cancels the distributed route of
corresponding protocols
Generate a default route to the RIPng
protocol;
originate command cancels the feature.
Explanation
Configure that provide a deviation value to the
route metric value when the port sends or
offset-list
receives
{in|out} offset-list
|access-list-name>
[<ifname>]
command removes the deviation table
Explanation
Set to filter the route when the interface
sends and receives RIPng data packets.
The
access-list-number |access-list-name > |
prefix<prefix-list-name>}
[<ifname>] command means do not set the
route filter
470
the
[no]default-information
RIPng data packet;
<access-list-number
{in|out}
[no] distribute-list
the
[no]
<number >
{<
{in|out}