Parameters:None.
Default Settings:Enable ARP scanning prevention log function
Command Mode:Global configuration mode
User Guide: After enabling ARP scanning prevention log function, users can check the
detailed information of ports being closed or automatically recovered by ARP scanning
prevention or IP being disabled and recovered by ARP scanning prevention. The level of
the log is "Warning".
Example:
Enable ARP scanning prevention log function of the switch
Switch(Config)#anti-arpscan log enable
15.3.9 anti-arpscan trap enable
Command:anti-arpscan trap enable
no anti-arpscan trap enable
Function:Enable ARP scanning prevention SNMP Trap function;" no anti-arpscan trap
enable" command disable ARP scanning prevention SNMP Trap function.
Parameters:None.
Default Settings:Disable ARP scanning prevention SNMP Trap function
Command Mode:Global configuration mode
User Guide: After enabling ARP scanning prevention SNMP Trap function, users will
receive Trap message whenever a port is closed or recovered by ARP scanning
prevention, and whenever IP t is closed or recovered by ARP scanning prevention
Example:
Enable ARP scanning prevention SNMP Trap function of the switch
Switch(Config)#anti-arpscan trap enable
15.3.10 show anti-arpscan
Command:show anti-arpscan [trust <ip | port | supertrust-port> |prohibited <ip |
port>]
Function:Display the operation information of ARP scanning prevention function
Parameters:None.
Default Settings: Display every port to tell whether it is a trusted port and whether it is
closed. If the port is closed, then display how long it has been closed. Display all the
trusted IP and disabled IP.
Command Mode:Admin Mode
User Guide:Use "show anti-arpscan trust port" if users only want to check trusted ports.
393