Edge-Core ES4626 User Manual page 450

Command Mode: Interface Mode
Example: Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip receive version 1 2
17.4.3.16 ip rip send-packet
Command: ip rip send-packet
no ip rip send-packet
Function: Set the Interface to be able to receive the RIP packets; the "no ip rip
send-packet" set the interface to be unable to receive the RIP packets.
Default: Interface sends RIP packets
Command Mode: Interface Mode
Example: Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip send-packet
17.4.3.17 ip rip send version
Command: ip rip send version { 1 | 2 | 1-compatible | 1 2}
no ip rip send version
Function: Set the version information of the RIP packets the interface receives. The
default version is 2; the "no ip rip send version" command restores the value set by
using the version command.
Parameter: 1 and 2 respectively stands for RIP version 1 and RIP version 2, 1 2 stands
for the RIP versions 1, 2.
Default: Version 2
Command Mode: Interface Mode
Example: Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip send version 1
17.4.3.18 ip rip split-horizon
Command: ip rip split-horizon [poisoned]
no ip rip split-horizon
Function: Enable split horizon. The "no ip rip split-horizon" disables the split horizon.
Parameter: [poisoned] means configure the split horizon with poison reverse.
Default: Split Horizon with poison reverse by default
Command Mode: Interface Mode
Usage Guide: The split horizon is for preventing the Routing Loops, namely preventing
450